This is Real! Astonishing
UAP with shock waves captured by SID-1 at Minato Mirai in Yokohama Japan. Is it
REAL UFO?
This is Real! Astonishing
UAP with shock waves
#Automatic_Observation_and_Imaging_Device_Robot_SID_1
#Space_Phenomena_Observatory_Center
#自動観測撮影ロボットSID1
#宇宙現象観測所センター
It is UAP (Unidentified Aerial Phenomena)
captured by SID-1, although it seems to be a considerable distance in the east
direction, above the US Navy base in Minato Mirai, Yokohama, Kanagawa
Prefecture.Since it is a flying object with an odd
shape, it can be recognized as a UFO.
Recording started at 10:31:59 on December
23, 2017. The day was clear and the visibility was 30km, the temperature was
8.6 ° C, the north-northeast wind, and the wind speed was 1.6m/s.
Since this UFO was moving from south to
north, the direction of the wind is the opposite of the wind direction, so you
can see that it is not a floating kite, garbage or balloon.
Moreover, as a result of enlarging and
image processing, it is not a helicopter, an aircraft, an osprey, etc. even if
it sees from the shape. Also, it is neither a bird nor a drone because wings,
legs, propellers and artifacts cannot be confirmed.
The video shows that a conical shock wave
(Mach Cone) generated in an aircraft flying at supersonic speed is seen in
front of the moving direction of this object. It looks like it is flying at
high speed with the air cut.
Assuming a considerable distance and
assuming a supersonic shock wave, the speed per hour seems to be at least Mach
1 (1,224 km / h).
It is similar to the image of a fighter's
shock wave during supersonic flight, but what is really strange is the shape of
this UFO. It's impossible.
In the case of general aircraft, the
temperature limit is 155 ° C (strength limit temperature. The melting point of
aluminum is about 660 ° C and the melting point of duralumin is about 650 ° C)
in the case of aluminum alloy, which is the main material. As the value
increases, a state that cannot withstand heat occurs.
The fact that the aircraft is slender and
has a sharp tip, thin wings, and a streamlined design as much as possible is
also a device for reducing the so-called heat walls such as compression heat
and frictional heat.
Surprisingly, however, this UFO has a shape
that is unlikely to be a supersonic flying object made in the air, which is
easily exposed to air resistance and heat like the flat head of a hexagon bolt.
If it breaks through the speed of sound
with its shape completely ignoring air resistance and pressure, it should break
apart in the air with its heat and shock waves.
But surprisingly, this mysterious object is
not. He keeps flying in peace.
That is the characteristic of this UFO and
it may be said that it is evidence of UFO. It cannot be an object on the earth.
It is proof of startle.
Direction captured by SID-1. Minato Mirai,
Yokohama City, Kanagawa Prefecture Japan
UAP over Minato Mirai captured by SID-1.
Real UFO?
The outline and shape were clarified by
enlargement and image processing.
It is very similar to the shape of the head
of a bolt called a flange bolt as shown in this figure.
Hex head and shock wave are displayed in
red.
A fighter shockwave
Summary
This very special UAP has never been
captured by SID-1.
It was flying in the opposite direction to
the wind direction at the time, so it was neither a piece of string nor a
balloon nor a balloon. Nor is it a bird, airship, helicopter or drone. Its
shape is not possible with supersonic flight. No other earth-made aircraft.
From these things, it can be recognized as an amazing UFO of geometric shape.
